Click image to view full size image
Description:
1.making carbon rods2.energy saving, high quality
3.easy operate
4.new finished mechanism charcoal
5.more stable
2013 HOT selling!!! Muti-functional CharcoalMaking Machine
1. Brief Introduction of thecharcoal machine
Thismachine is used to make briquettes in charcoal, medicine, food,industry processing area. It is automatic, which can make thepowder into briquettes with different shapes as customers’requirements. It is designed as the GMP standard, with thestainless steel externality, the non-obstacle operation andmaintain, the smart figuration, the security alarm system andnoiseless featureless.
2.Scope of the charcoal machine
Charcoalmachine can take sawdust, wood, rice husk, coconut shell, peanutshell & other woody material into briquette, which can be usedin boiler, heating &warming.Briquetting is a process thatbiomass is compressed under high pressure and hightemperature.
3. The molds of the charcoal machine
4.Certifications
5. Working Principle of Biomass CharcoalMachine:
Briquettemachine uses a large screw to grind, compress and extrude thebiomass into briquettes. The natural lignin content in biomass isliberated with wood fiber under highpressure and temperature.In the briquetting process ligninserves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various mouldsof high density briquette, such as hexagonal, quadrangular, square,etc. As your requirement, we can also change the shape to order.And the diameter of briquettes arefrom 50-80 mm. Moreover non-binder needs to be used duringthis process.
6. Processing flowchart of the BBQ charcoalmachine
Biomass material → Crush → Dry → Briquette → Carbonize → Charcoal
7.importance
Charcoalis indispensable in people''s lives, not only widely used in thefields of metallurgy, chemical industry, medicine, environmentalprotection, industrial, food barbecue, hot pot, heating and othercivilian areas at the same time also more popular. However, withthe improvement of the country to stop deforestation deforestationefforts to increase people''s awareness of environmentalprotection, natural charcoal production is less and less, and amechanism to replace the natural charcoal charcoal is growingconcern by the majority of users. I plant charcoal equipment beenexported to other Asian countries, such as Japan, Malaysia,Myanmar, Thailand, Kazakhstan and other countries. I plant to sendtechnicians install free training, package will package. Want toconsult Buy charcoal, consult charcoal prices, charcoal equipment,Henan mechanism charcoal prices please go to [Wanqi]. [WanqiMachinery Factory] Warmly welcome consumers to come to visit ourfactory and our factory has special shuttle customers.
8.The parameters of the charcoal machine
Type | Parameter | Output (kg/h) | Power (Kw) | Dimension (mm) | Weight (t) |
ZBJ-7 | Abrasive size:30-50mm, Heating ring:1.5KW(3pieces) | 130-150 | 11 | 1650×600×1260 | 1 |
ZBJ-8 | Abrasive size:30-60mm, Heating ring2KW(3pieces) | 200-250 | 15 | 1850×700×1260 | 1.2 |
ZBJ-9 | Abrasive size:30-100mm, Heating ring:3KW(3pieces) | 300-400 | 22 | 1860×800×1360 | 1.5 |
9. The final productsof charcoal machine
How to Properly Use Charcoal
The whole process of bakedcharcoal to hot deal with how much heat, we can through thespecific temperature to measure, below we will through the rawmaterial, molding, coking, finished products to analysis and whatis the relationship between the temperature and carbon.
Partone
Dry raw materials:
To ensure the quality of thecharcoal, carbon rods must do. In addition depends charcoalequipment, process, quality of the rod, but also depends on thesize of the moisture contained in the feedstock. Generalrequirements for the rate of the water content of the raw materialto less than 12%, but also more than 6%. Therefore, our first stepis drying raw materials.
Drying of raw materials we canfirst be containing larger water raw materials in the open air forairing or drying the bleachery in 1 ~2 days, let the surface waterevaporation, to reduce the heating time and fuel consumption. Then,we will be the size of qualified raw materials into the hot airdryer drying to a moisture content of less than 12% of the dry rawmaterials, drying temperature is 160°C ~ 250°C.Without dryer, Ifthe drying time is long or in the case of strongsunlight.
Parttwo
Production rods
Raw material can be sticks arecompleted through Rod Molding Machine (or system of rods). In orderto ensure that the density of carbon stipends, smooth surface, noobvious cracks. According to the type of raw materials and moistureto select the appropriate molding temperature, high or lowdetermined by the field-tested. In general, if we assume that thepropeller is qualified, and the raw material moisture contentbetween 6 to 12%, we can be sawdust, wood sawdust, wood shavingsand bamboo raw materials forming the final temperature control inthe 260 to 320 °C.
Partthree
Charring
We will be shaping the finalproduct of the raw carbon, then we should pay rods through the thecarbonization furnace or brick kiln firing (or calcined) intoqualified charcoal. In the low-temperature carbonization process ofcarbon generally can be divided into three temperatureranges.
1 , Drying stage
From start of ignition, tocarbonization furnace temperature slowly rose to 160 °C, whenstipends moisture contained mainly rely on applied heat and pay rodgenerated by the combustion of the heat for evaporation. Almost nochange in the chemical composition of the salary bar.
2 , The charring initialstage
This stage is mainly rely bar’sown combustion to generate heat, so that the the carbonizationfurnace temperature to rise to between 160 ~ 280 °C. In this case,the woody material, the thermal decomposition reaction, thecomposition began to change. Which is unstable, such ashemicellulose decomposition of CO2, CO and a small amount of aceticacid and other substances.
3 , Comprehensive carbonizationstage
This stage of the temperature of280 to 400 ° C, at this stage, the wood material is rapidly thermaldecomposition, and simultaneously generates a large amount ofacetic acid, methanol, and liquid such as wood tar product. Alsoproduce a combustible gas such as methane, ethylene, and combustionof the combustible gas in the furnace. The thermal decompositionand gases produced by combustion of a large amount of heat, so thatthe furnace temperature elevated. Wood materials at hightemperature dry distillation into carbon.
To calcined pyrocarbon, inaddition to the above three stages, but also of the carbonizationfurnace temperature continues to rise even higher. Thus, it ispossible to the discharge of volatile substances remaining in thecharcoal, and increase the carbon content in the charcoal,increasing carbon graphite structure, conductivereinforcing.
From the above, weare in the whole process of burning charcoal, all the time dealingwith the heat, that is to say, we have to consume a portion of thethermal energy in order to improve carbon economic value and usevalue.
If you have any questions, pleasecontact me!
Welcometo visit our factory!!!
You choose, I promise!!!
2013 HOT selling!!! Muti-functional Charcoal Making Machine
